Tag Archives: hydronic
Do you Work for Taco?
Do you Work for Taco? Continue reading
Posted in Uncategorized
Tagged BumbleBee, circulator, ECM, Energy, heating, hot water, hydronic, pump, pumps, Taco, Taco ComfortSolutions, Taco HVAC
Leave a comment
Baseboard, Radiant, and Boilers, ….Oh My!
At our FloPro classes held at Taco in Cranston (http://flopro.taco-hvac.com/2015flopro_training.html) we ask what is the ONE thing you want to know about Taco, Hydronics, Life…before class starts. One recent question, which I have seen before, was “How is boiler sizing … Continue reading
Posted in Controls, FuelMizer, Radiant Heat
Tagged boiler controls, Energy, FuelMizer, heating, hydronic, outdoor reset, savings, Taco, Taco HVAC, TacoHVAC
Leave a comment
Why, Why, Why
A buddy of mine, Wayne, a contractor and HVAC instructor here on Long Island and I were having a conversation the other day and he asked why is Taco coming out with all of these new ECM … Continue reading
Tech Tips 2.0
Had to pull this out of the archives in my mind and I have had these questions presented to me over the years, just don’t remember where or when or who asked them. Anyway what sparked this was a question was … Continue reading
Posted in Controls, Radiant Heat, Uncategorized
Tagged boiler controls, BumbleBee, FuelMizer, heating, hot water, hydronic, outdoor reset, relay, Taco, Taco HVAC, TacoHVAC, Zone Sentry, zone valve
Leave a comment
Blocking and Tackling
I was looking at the X-Pump Block for a customer that wanted to install this with a new domestic water heater with side taps for a radiant floor heating system. I understand the concept but the design procedure I didn’t understand … Continue reading
Posted in Radiant Heat
Tagged boiler controls, circulator, DHW, Domestic, Energy, heating, hot water, hydronic, outdoor reset, pump, pumps, Taco, Taco HVAC, TacoHVAC, x block, x pump block
Leave a comment
Set it and Forget it – part 2
This blog post is part 2 from homeowner Chris in CT about his brand new heating system. In part 1 (which you can read here), Chris had questions about the new FuelMizer installed and this post has questions regarding the … Continue reading
Inquiring minds want to know – part 1
As technology is expanding and growing in the home, it is also showing up in the mechanical rooms today and hydronics can be intimidating to a homeowner. Chris in CT, a homeowner, contacted me and had some questions for Ask … Continue reading
Posted in Controls, FuelMizer
Tagged boiler controls, Energy, FuelMizer, heating, hot water, hydronic, outdoor reset, relay, savings, Taco, Taco HVAC, TacoHVAC
Leave a comment
Tech Tips
Has it been over a month since my last post? Needless to say, I have been busier than a beekeeper at the Rose Bowl Parade meeting tons of you guys at the Factory! Since I have been doing a lot … Continue reading
Posted in Controls, Radiant Heat
Tagged Energy, heating, hot water, hydronic, Taco, Taco HVAC, TacoHVAC, Zone Sentry, zone valve
Leave a comment
BeeTech 2.0
Hey Dave, Since the BumbleBee is a variable speed circulator based upon Delta-T, can we consider this to be “Indoor Reset?” – Anthony, NY Great question Anthony, ya know I was thinking the same thing the other day when I was doing a … Continue reading
Posted in BumbleBee
Tagged BumbleBee, circulator, ECM, hydronic, pump, Taco, Taco HVAC, TacoHVAC
6 Comments
Ask Dave! BeeTech 1.0
Hey Dave, I am familiar with other ECM circulators that have a cord already pre-wired; does the BumbleBee also come with one? If not, can we add one? Jim D, New Jersey. Jim, thanks for the question. The short answer … Continue reading
dhblogtaco.wordpress.com 