Author Archives: davidholdorf

Do you Work for Taco?

Do you Work for Taco? Continue reading

Posted in Uncategorized | Tagged , , , , , , , , , , , | Leave a comment

Baseboard, Radiant, and Boilers, ….Oh My!

At our FloPro classes held at Taco in Cranston (http://flopro.taco-hvac.com/2015flopro_training.html) we ask what is the ONE thing you want to know about Taco, Hydronics, Life…before class starts. One recent question, which I have seen before, was “How is boiler sizing … Continue reading

Posted in Controls, FuelMizer, Radiant Heat | Tagged , , , , , , , , , | Leave a comment

Why, Why, Why

      A buddy of mine, Wayne, a contractor and HVAC instructor here on Long Island and I were having a conversation the other day and he asked why is Taco coming out with all of these new ECM … Continue reading

Posted in BumbleBee | Tagged , , , , , , , , , , | Leave a comment

Tech Tips 2.0

Had to pull this out of the archives in my mind and I have had these questions presented to me over the years, just don’t remember where or when or who asked them. Anyway what sparked this was a question was … Continue reading

Posted in Controls, Radiant Heat, Uncategorized | Tagged , , , , , , , , , , , , | Leave a comment

Blocking and Tackling

I was looking at the X-Pump Block for a customer that wanted to install this  with a new domestic water heater with side taps for a radiant floor heating system. I understand the concept but the design procedure I didn’t understand … Continue reading

Posted in Radiant Heat | Tagged , , , , , , , , , , , , , , , | Leave a comment

Set it and Forget it – part 2

This blog post is part 2 from homeowner Chris in CT about his brand new heating system. In part 1 (which you can read here), Chris had questions about the new FuelMizer installed and this post has questions regarding the … Continue reading

Posted in BumbleBee | Tagged , , , , , , , , , , | Leave a comment

Inquiring minds want to know – part 1

As technology is expanding and growing in the home, it is also showing up in the mechanical rooms today and hydronics can be intimidating to a homeowner. Chris in CT, a homeowner, contacted me and had some questions for Ask … Continue reading

Posted in Controls, FuelMizer | Tagged , , , , , , , , , , , | Leave a comment

Tech Tips

Has it been over a month since my last post? Needless to say, I have been busier than a beekeeper at the Rose Bowl Parade meeting tons of you guys at the Factory! Since I have been doing a lot … Continue reading

Posted in Controls, Radiant Heat | Tagged , , , , , , , , | Leave a comment

To Flange or not to Flange

I know it’s been a while since I have written anything, been a very busy couple of months. We have had a ton of people coming down to Headquarters in Cranston. If you haven’t been down in a while or … Continue reading

Posted in DHW Recirculation, SmartPlus | Tagged , , , , , , , , | Leave a comment

Real Savings

In my last blog I was talking about switching car insurance carriers so that I can continue to get savings where eventually if I switch enough, I should be able to get my insurance for free! I know that won’t … Continue reading

Posted in Uncategorized | 1 Comment